Using The Vacuum Cleaner - Westinghouse WFVCZJX8217 Bedienungsanweisungen

2. Insert the handle into the telescopic tube.
3. Extend the telescopic tube by pressing the button and pull out the telescopic
tube.
4. Fitting the accessories to the extension tube.
ACCESSORIES
Floor brush:
Can be used for all normal cleaning of carpets and rugs. It can also be used without
the brush protruding to vacuum hard flooring.
• Vacuum carpets and rugs with the brush retracted:
Press the foot control
• Clean hard flooring which is not susceptible to scratching with the brush
protruding:
Press the foot control
2 in 1 Crevice tool / dusting brush:
For cleaning radiators, corners, edges, drawers, skirting boards
ornate or carved articles, etc.

USING THE VACUUM CLEANER

Unwinding and rewinding the cable
1. Unwind length of cable and insert the plug into the power socket. A YELLOW
mark on the power cable shows the ideal cable length. Do not extend the cable
beyond the RED mark.
2. To rewind the power cable, press the cord rewind button with one hand, and
guide the other hand to ensure that it does not whip causing damage.
Vacuuming
1. Press the On/Off button to switch the appliance on. It is advisable to set the
speed control to MIN before switching the appliance on.
2. When vacuuming, pull the cleaner behind you on its wheels.
3. The suction power can be regulated to suit the type of flooring. Adjusting
EN
the suction power by rotating the speed control switch to "MAX" for maximum
power, "MIN" for minimum power.
6
.
.