7
DMX OUTPUT VIA USB
freeDMX is a standard DMX512A interface. It may be used with any software
application that supports DMX to distribute DMX data. The interface connects
to the computer via USB. Data is sent to the interface via USB and where it is
internally distributed to the XLR output for DMX output to DMX-controlled
fixtures.
Quick Start for Use with a Computer
The steps below will be described in more detail in the following sections.
1
Download the driver software from the internet
download section of the product.
2
Connect the interface to your computer and the DMX512 control
network.
3
Install the driver software.
4
Start your lighting control software and configure it for use with the
freeDMX.
5
Create your show.
www.eurolite.de
35
www.eurolite.de