Potential Risks And Warning Messages - Elbur Rubens 3 Gebrauchsanweisung

EN

2.2. Potential risks and warning messages

Warnings
Use the overbed table in accordance to normal operating procedure
and its purpose.
Before start using the overbed table, read instruction carefully
and familiarize with rated values provided at name plates, labels
and in this manual. It helps to prevent any damage and risk occurring
due to incorrect operation.
Keep the instruction manual for future reference and have access to it at
any time – it provides information for operator and patient regarding the
convenient handling and safe operation.
Safe working load of the overbed table tray cannot be exceeded. Do not
lean on the table – it can cause damage of adjustment mechanism and
lead to serious injuries!
Before every use make sure that the overbed table is in proper
and faultless condition.
Only use technically perfect overbed table.
Contact manufacturer or distributor if the exchange or repair of faulty
parts have to be made.
If damage or malfunction is suspected, take the overbed table out
of service immediately and label it as non-conforming product.
Use only original Elbur sp. z o.o. sp.k. accessories – modification of
overbed tables is strictly forbidden without authorization of our company.
Make sure that other attached equipment can work in a secure and safe
manner (do not hesitate to contact manufacturer with questions).
Make sure that castors have their brakes applied when location of
overbed table is not going to change.
Close tray down before relocating the overbed table. Do not load overbed
table tray during pushing it closer to the nursing bed.
Before adjusting the height of overbed table tray, make sure there are
not any obstacles, such as furniture, window sill etc.
Make sure that no cable from electric devices is rolled over during
relocating overbed table.
Make sure that no cable from electric devices is damaged, stretched
or crushed between overbed table parts.
Do not clean overbed tables with a water jet or a high-pressure cleaner.
Clean only with a moist towel.
Never use scouring agents, abrasive cleaning agents, stainless steel
cleaners or scouring pads, because they can damage the surface.
Remove quickly stains, liquid from shelf or top of the overbed table –
otherwise it can cause dampness of particle board.
Read instruction carefully before commencing assembly.
Elbur sp. z o.o. sp.k.
RUBENS Overbed tables
9 z 36