Scope Of Delivery; Spare Parts; Assembly Of Rubens 9 - Elbur Rubens 3 Gebrauchsanweisung

Verify the shipment contents with your order before commencing
assembly to make sure that you have got all necessary parts
and components.
Remember to use proper tools during assembly.
It is obligated with every maintenance to perform regular inspections, to
ensure the safe condition of the overbed table.
The safety information indicated above and found in this instruction
manual must always be strictly observed.

3.0. Scope of delivery

Before commencing assembly of the overbed table, please read
instruction carefully and verify the shipment contents with your order. Please
contact your distributor or Elbur sp. z o.o. sp.k. customer service, if you miss
any component or get something in bad condition
If you place an order for RUBENS 3 you do not to have to assembly overbed
table, because it is done by manufacturer. That is why you should bring out
of the box completely assembled RUBENS 3 overbed table.
If you place an order for RUBENS 9 you should expect to receive (numbers
in brackets referred to the picture on next page):
• 4 allen screws M8 x 30 (no. 1),
• 1 vertical bar (no.2),
• 1 bottom frame with 4 castors - 2 of them can be locked (no. 3),
• 1 movable support bar with adjustable tray (no.4),
• 1 flat spacer (no. 5),
• 1 permanent part of the desktop with fixed angle (no. 6)
• 1 allen key.

4.0. Spare parts

Spare parts can be ordered from distributor or Elbur company.
For reasons of safety, it is allowed to use only original spare parts
or accessories from Elbur sp. z o.o. sp.k. Otherwise, our company will
assume no liability for any accidents, damages, injuries and risks that come
about through the use of other spare parts or accessories.

5.0. Assembly of RUBENS 9

Before commencing assembly of the overbed table, please read carefully
instruction manual and verify the shipment contents with your order (chapter
3.0). Please contact your distributor or Elbur sp. z o.o. sp.k. customer
service, if you miss any items or get something in bad condition.
Warnings
In order to avoid wrong assembly, read carefully instruction manual
and pay attention to labelling on the overbed table. Remember also
to use proper tools.
Elbur sp. z o.o. sp.k.
RUBENS Overbed tables EN
10 z 36