Event Schedule - OJ Electronics OCC4 Benutzerhandbuch

English OCC4/OCD4
Set temp.:
o Act. temp*.: Shows the actual measured temperature.
Scr. saver:
Press the OK button to select or deselect the display options. Then
select Exit in the menu to return to the initial display and view your
chosen settings.
* Only with floor application.
ngs

Event schedule

Allows you to choose the type of weekly

Event schedule you require.
5:2 4-event :
6:1 4-event :
date
7:0 4-event :

5:2 6-event :
k
6:1 6-event :

rt and 7:0 6-event:
0:7 6-event:
ings
Select the required event schedule and confirm with OK.
For instructions on programming the time and temperature for the

Event schedule, see Event settings.
Shows the current temperature setting.
Switches off the display after 30 seconds if no but-
ton is pressed. Any subsequent press of a button
reactivates the display. The thermostat remains on
and runs the selected program.
Monday to Friday with 4
events and Saturday to
Sunday with 2 events.
Typically used if you work from Monday to Friday.
Monday to Saturday with 4 events and Sunday
with 2 events. Typically used if you work from
Monday to Saturday.
Monday to Sunday with 4 individual events. Allows
you to choose individual programs for each of the
7 days of week.
Monday to Friday with 6 events and Saturday and
Sunday with 2 events. Typically used if you work
from Monday to Friday.
Monday to Saturday with 6 events and Sunday
with 2 events. Typically used if you work from
Monday to Saturday.
Monday to Sunday with 6 events. This allows you
to choose individual programs for each day of the
week.
Monday to Sunday with 6 events and the same
program for all days of the week.
© 2014 OJ Electronics A/S
English
Event schedule

OK

9