Factory Reset; Information; Back; Exit - OJ Electronics OCC4 Benutzerhandbuch

English OCC4/OCD4

Factory reset

Allows factory settings to be restored. Your
d for personal settings will be lost, see Factory
settings.
Press OK and choose Reset in the menu.
Confirm with OK.

Information

Displays the thermostat software version.


Back

In various parts of the menus and submenus
you will find the Back menu item.
Use Back to return to the last step.
with

Exit

0 °C, Returns to initial dispay.
as

ERROR MESSAGES

he four If a fault or error occurs, the thermostat will display an error code
as follows:
tic. E0: Internal failure. The thermostat is defective.
K.
elected E1: Internal sensor defective or short-circuited.
ow E2: External sensor defective or short-circuited.
E5: Internal overheating. Inspect the installation.
ther-
es and
occur.
e

Replace thermostat.
© 2014 OJ Electronics A/S
English
Factory reset

OK

Information

OK

13