Proflow 6000 Menu Structure; Unit Power Up/Power Down; Usb Activation - Restek ProFLOW 6000 Bedienungsanleitung

8.0 ProFLOW 6000 menu structure

8.1 Unit power up/power down

Press the
The LCD screen will display
the device intro screen:
To power off, press and hold the
Other messages encountered at power up

8.2 USB activation

To enable the USB, press the
Use the (arrow) keys to select the USB menu:
Press the (menu) button again to enter the value select screen.
Use the (arrow) keys to toggle between USB "on" and "off. "
To return to the main menu screen, press the
To exit and return to measuring flow, press the
è See Section 7.0: Data Collection on the PC
(Power) button:
Followed by
calibrated date:
01/10/2012
If the unit is hooked up to a flow stream with a flow rate less than 0.50 mL/min,
the unit will report an "under range" status for the flow. This message will appear
until the flow rate exceeds 0.50 mL/min.
(Menu) button.
Followed by measured
flow data:
(Power) button.
(menu) button.
(menu) button again.
www.restek.com
9