RaidSonic Technology ICY DOX IB-RD3741-C31 Handbuch Seite 7

1.
Power button
2.
SET 1 button
3.
SET 2 button
4.
Smart fan button
5.
Smart fan status LED
6.
Micro SD slot
7.
SD slot
8.
USB 3.0 Type-A interface
9.
Power LED
10.
SET 1 RAID LED
11.
SET 2 RAID LED
12.
SET 1 ERROR LED
13. SET 2 ERROR LED
14.
DRIVE-LED
Manual IB-RD3741-C31
It needs to be pressed to power on.
It needs to be pressed and held for 3 seconds to power off.
Remark! This design prevents accidental power off.
This device is built in two sets of RAID!
Select SET 1 RAID mode
Select SET 2 RAID mode
Select on/off smart fan function (temperature sensor-controlled fan speed).
LED Display Description
Blue on: The fan is adjusting the fan speed according to the temperature.
Blue off: The fan is running at low speed.
Supports Micro SDXC (UHS-II)
Supports SDXC (UHS-II)
Supports data transfer rates with up to 5 Gbit/s
• Lighting blue, device powered on
• Lighting orange, standby mode
• OFF, device switched off
SINGLE, LARGE, RAID 0, RAID 1
• Lighting orange, active
• OFF, not active
SINGLE, LARGE, RAID 0, RAID 1
• Lighting green, active
• OFF, not active
Lights up red, if:
• Drive not inserted
• Format error
• Reconstruction error
Single mode don't display HDD error light!
Lights up red, if:
• Drive not inserted
• Format error
• Reconstruction error
Single mode don't display HDD error light!
HDD1 / HDD2 / HDD3 / HDD4
- Lighting blue: drive inserted
- Lighting purple: Data transfer
- Glowing purple: under rebuilding (in RAID 1 mode)