RaidSonic Technology ICY DOX IB-RD3741-C31 Handbuch Seite 14

Manual IB-RD3741-C31
First connect the power cord and turn on the power switch to stabilize the current in the device, then connect the USB
Type-C cable to your computer and power on the device.
™
Then activate the power switch on the front panel and verify that the computer is turned on
Now you can set the preferred RAID settings as follows:
• When using RAID function, drives with the same brand, model and capacity is strongly recommended.
• Setting or changing the RAID mode requires you to re-format the drives. This will erase all data on the hard drives
that are being formatted. Make sure to backup all existing data first!
• Be careful! When using the confirmation button in any RAID mode, all data will be erased.
• Never use the confirmation button when all settings have been completed and the drives contains your data!!!