EUROCOM IMPRESSA D40EF A Ausführliches Benutzerhandbuch Seite 24

Concise User's Guide
Switching/Enabling Displays (Driver Controls)
You can use the video driver's built-in controls to switch between displays as follows:
1. Plug the VGA monitor or TV into the appropriate
port.
2. Follow the instructions in
Controls" on page
Settings.
3. To use your display devices in Mirror mode,
make sure the Mirror icon
choose which device is to be Primary, and which
is to be Secondary.
4. Click OK > OK to apply the settings (you may
need to give your monitor/TV a few seconds to
refresh).
5. Click Yes to keep the settings.
6. To use your display devices in Extended Desktop
mode, click the Mirror icon
Extended Desktop icon
device is to be Primary, and which is to be
Secondary.
7. Click OK > OK > Yes to restart your computer.
8. Upon restart the displays will be configured for
you.
18 - Video Features
Downloaded from www.Manualslib.com
"Video Driver
16, and choose Driver Mode
is displayed, then
to change to the
, then choose which
manuals search engine
External Display Activation
If you plug-in an external display device while the system is pow-
ered on, follow this procedure:
1. Click the Display devices detection button to detect the exter-
nal display.
2. Click in the Power on secondary device tickbox to activate the
external display.
Figure 9 - Driver Mode Setting
!