Storage And Transport - FITFIU FITNESS MC-260 Betriebsanleitung

Problem
The display shows "E04"
The display shows "E05"
The display shows "E06"

STORAGE AND TRANSPORT

FOLDING AND TRANSPORTING
Unlock the console lock knob and set the vertical column to position 1, release the knob and drop the column to
position 2.
To transport the belt place the belt in vertical position, as shown in the picture, peel off the wheels by pressing in the
direction (A) and when holding itself (B), release your hands.
1
STORAGE
Store equipment in a clean, dry, indoor location. Never leave or use the unit outdoors. Make sure the main power switch
is turned off and the power cord is disconnected from the wall outlet.
Cause
Sudden high current protection
The electrical protection has been
triggered.
Problem with motor cable
2
ELECTRIC TREADMILL
Disconnect the power and reconnect it.
Replace the power supply sleeve on the PCB.
Check if any part of the machine is jammed.
Check that the input voltage is normal
Make sure the treadmill is not hooked or
cannot rotate because of an obstruction.
Check all connections
Reconnect the motor cable or replace it.
A
55
MC-260
Solution
B
EN