Operation - STIEBEL ELTRON EBK 5 G automatic Bedienung Und Installation

oPEration

oPEration
5. Operation
eBK 5 g
7
6
5
eBK 5 ga
7
3
5
1 Temperature selector with one-touch button for switching
the appliance on
2 Drawing cold water
3 Filling the appliance
4 Tap outlet pipe
5 Overflow/steam pipe
6 Drawing hot water
7 ON/OFF indicator light
Using the tap, fill up the appliance at least as far as the cup
»
symbol but with no more than 5l of water.
18 |EBK
5
4
3
2
1
1
2
3
4
5
4
3
2
1
1
2
6
4
6
5
4
3
2
1 Temperature setting OFF
2 Temperature setting warm
3 Descale setting
4 Temperature setting warm to hot (steaming)
5 Temperature setting hot (steaming) to boiling
6 Boiling end stop
Continuously turn the temperature control as far as the boiling
»
end stop.
Switch the appliance on by pressing the temperature selector.
»
The ON/OFF indicator illuminates while the water is heated.
Once the selected temperature has been reached, the appliance
switches itself off. The ON/OFF indicator goes out.
The temperature at which the appliance turns off can vary
depending on the amount of water that has been put in, the degree
of scaling and the residual water temperature.
If needed, you can bring the water straight back to boiling point
»
by keeping the temperature selector pressed.
You can stop the heating process at any time by turning the
»
temperature selector to OFF.
Draw the water off by via the tap.
»
1
www.stiEBEl-Eltron.CoM