Madison MAD-TA20BT Bedienungsanleitung Seite 14

Connecting to an external Amplifier or Receiver from the Line Out :
This system has a L/R stereo RCA line output on the rear panel of the CD player
section. It is compatible with the line input RCA jacks on any common home amplifier
or receiver sound system.
Basic operation steps :
•
Connect a pair of RCA stereo cables from the line input jacks of your home
audio amplifier or receiver to the red and white « LINE OUT » jacks on the
rear panel of the CD player section of this system.
•
You can now select either the CD player or USB Inputs as your desired
output source only, however the volume will now be controlled by your
external home amplifier or receiver. Follow your manufacturer's instructions
for further information on the use of this setup.
TUBE POWER AMPLIFIER
Playing a Bluetooth device
This system can connect to a Bluetooth compatible device such as a smartphone or
portable music player and play wirelessly audio tracks that are stored in your
smartphone or music player.
Basic operation steps :
•
Press STANDBY/ON on the front panel to turn the system on.
•
Set the input switch to BLUETOOTH. The BT LED is now flashing.
•
Enable the Bluetooth connection on your spartphone or player and search
for new devices.
•
Select MAD-TA20BT in the list of found devices.
•
If your smartphone or portable music player prompts you for a pairing code,
enter 0000.
Playback control
The remote can control following functions:
•
Volume up/down
•
Play/pause
©Copyright LOTRONIC 2015
•
•
MAD-TA20BT
Next/previous track
Mute
14