Madison MAD-TA20BT Bedienungsanleitung Seite 12

Basic operation steps :
•
Press STANBY/ON on the remote control to turn the system on.
•
Press the INPUT button repeatedly until a radio station frequency appears
on the front panel display.
Tuning the Radio :
There are 3 tuning modes for both AM and FM modes.
Full Automatic Tune :
•
Whilst in radio mode, press the 'AUTO' button on the remote control, the
system will automatically search for and save presets for all strong station
frequencies found.
Semi Automatic Tune :
•
Whilst in radio mode, press and hold the « << » or « >> » button on the
remote control or front panel and the radio will scan to the nearest strong
station frequency in whichever direction you selected.
Manual Tune :
•
Whilst in radio mode, press the « << » or « >> » button on the remote
control or front panel and the radio frequency will change by 1 step at a
time. Press the « << » or « >> » button until you find your desired frequency.
Saving Radio Presets :
•
Once you have found your desired radio station frequency, you can save the
station in one of 10 stations presets. Do this by pressing the « SAVE » button
on the remote control, then find your desired preset number by pressing
the « CHANNEL/TRACK » button on the remote control.
PLAYING THE USB INPUT:
This system can play audio files stored on a flash memory USB stick which is
formatted to FAT32 file system, and with a capacity no larger than 16GB.
The playable audio file types are:
•
MP3 Audio :
MPEG 1 & 2, audio layer 3 files
o
File extension : .MP3
o
Transfer Bit Rate : 8kbps ~ 320kbps
o
•
WMA Audio :
Windows media file
o
File extension : .WMA
o
©Copyright LOTRONIC 2015 MAD-TA20BT 12