Assembly - Zipper Maschinen ZI-COM24E Betriebsanleitung

13

ASSEMBLY

Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please understand
that later claims cannot be accepted anymore.
13.1 Assembly
Wheels:
Mount the wheels like on the picture
Rubber foot:
Mount the rubber foot like on the
picture
Oil:
Place machine on a level ground.
Open the oil filler. Fill in Oil SAE30
until it reaches the middle mark of
the oil sight glass. Close oil filler
ATTENTION! For transport oil has been drained. Fill up with oil SAE30
before first operation! Failure to do so will result in permanent engine
damage and void guarantee!
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-COM24E / ZI-COM50E
W A R N I N G
ASSEMBLY
26