Cleaning The Brush - Samsung POWERbot SR20J925-Serie Kurzanleitung

6

Cleaning the brush

1
Remove the brush cover
4
Reassemble the brush
✻ ✻ If a brush or brush cover is not assembled correctly after the maintenance work, scratches may occur on the
floor, or product malfunction may occur. Therefore, assemble them correctly by referring to the cleaning and
maintaining section of a user manual.
Information codes
✻ ✻ Refer to the user manual for steps to take for each Information code with
Cleaning and maintaining
-2
You must turn off the emergency switch before cleaning POWERbot.
2
Remove the brush
5
Reassemble the brush
cover
English-12
3
Clean the brush
mark on the display panel.