Functions; Setting Child Lock - Sage the Compact Wave Soft Close Kurzanleitung

Functions

SETTING THE CLOCK - 24 HOUR
CLOCK DISPLAY
Press SET CLOCK on interface panel. The
microwave will beep once.
The default time is 06:00. The highlighted
digits will flash to show it can be adjusted.
Turn TIME dial to adjust hours and press
START or SET CLOCK button to confirm.
The microwave will beep once.
Minutes now flash to show they can be
adjusted. Turn TIME dial to adjust minutes
and press START or SET CLOCK button
to confirm. When the new time is saved,
the clock display will flash twice, and the
microwave will beep once.
NOTE
If you forget to press START to confirm hours
or minutes, after 1 minute the microwave will
automatically confirm your selection.

SETTING CHILD LOCK

Press and hold STOP/CLEAR
seconds. The CHILD LOCK screen with flash
3 times, and the microwave will beep once.
1
2
3
To disable CHILD LOCK, press and hold
the STOP/CLEAR button for 3 seconds. The
time will be displayed, and you will have full
functionality of your microwave.
STANDBY
When the microwave has been idle for
1-minute, STANDBY mode will be activated,
and the clock will be shown.
If the clock has not been set, the display will
remain at 00:00
If the clock has been set, the time will be
displayed on the screen.
TIME & POWER LEVEL
ADJUSTMENT
The maximum microwave cooking time
is 95 minutes (95:00).
There are 10 power levels available.
Adjusting the time
button for 3
Rotate the TIME dial clockwise to set the
desired time, then press start.
The default time will be 30 seconds.
Adjusting the power level
Press the POWER button on the interface.
g / kg
The default power will be P100 (100%).
When the POWER button is pressed again,
the POWER LEVEL will decrease from P100
(100%) to P10 (10%), in 10% increments.
1
2
3
EN
g / kg
17