SOLIS THERMOPAD 2260 Bedienungsanleitung Seite 42

S T ART I NG UP
s
You can use the heating pad to warm up and
•
relax. It is equipped with a sliding temperature
switch, allowing you to select one out of three
heating settings to find a temperature that feels
nice to you. The comfortable and cuddly pro-
GB D
tective cover must be pulled over the heating
element every time it is used and be fastened
with the push buttons.
Unfold the heating pad and make sure that the
•
protective cover is pulled over it and that the
connection adapter is firmly connected to the
socket in the heating element. Plug the power
plug into a suitable power outlet.
Sliding switch
82
Temperature level
display (1/2/3)
Push the sliding switch up one level, to the po-
•
sition 1. The figure "1" lights up in the display.
You can feel the heating pad warm up after a
few minutes.
If you want a higher temperature setting, push
•
the switch up to the next position. The figure
"2" lights up in the display. If you want to se-
lect the maximum temperature setting, push the
switch to the uppermost position so that "3"
lights up in the display.
Should the heating pad get too warm, push the
•
switch back down to the "2" or "1" position.
The pad will noticeably cool down after a few
minutes.
If you want to switch the appliance off, push the
•
switch all the way down, the figure in the dis-
play goes out. Disconnect the power plug from
the power socket.
Note: The heating pad reaches the set temper-
•
ature only after approx. 15 minutes. Therefore,
check the temperature after 15 minutes with
the back of your hand to make sure that it feels
GB GB
83