Indicator Lights - Caframo BDC1850 Handbuch

Button Operating Functions
P ower - Turns the stirrer on and off. When power button is pressed for the first
time stirrer is activated in "pause" mode. The set speed is displayed. When
the Power button is pressed a second time, the stirrer is turned off. The last
set speed is remembered.
Start/Pause - stops the stirrer when operating. Start/Pause returns the stirrer
to the previous condition and previous display or starts the stirrer if stopped.
Display - When running, toggles display between speed (rpm) and torque
(Ncm).
Speed - determines speed range (high/low speed) and overrides automatic
choice when allowable. The LEDs indicate which speed range is operating.
Increase/Decrease rpm Buttons - Press buttons once to increase / decrease
set speed by one rpm. Press and hold to increase / decrease speed at a
greater rate. As the stirrer is auto ramping to a faster speed the user can stop
the increase in speed by pressing the decrease button. This changes the set
speed to the present actual value.
Keypad Membrane
Speed Button
High Speed LED
Low Speed LED
Display Button
RPM LED
Torque LED
Power Button
with LED
Overload LED

Indicator Lights

• High Speed / Low Speed LEDs - These indicate the stirrer's set range.
• O verload LED - This indicator will flash when an overload condition is ap-
proached. This indicator will remain on when an overload condition is reached
and the stirrer is shut down.
10
Increase/Decrease
rpm Button
Zero Torque Button
Start/Pause Button
with Pause LED