Troubleshooting; Technical Specification - ORFELD BL818 Bedienungsanleitung

EN

6. Troubleshooting:

To reduce the risk of shock and unintended operation, turn
battery pack before servicing.
Problem
Vacuum not pick up debris
Brush roller not spin
Poor suction
Vacuum suddenly turns
its own
Vacuum won't turn ON or
charge
Short running time
In any other case or if the solution explained above did not solve the problem,
please contact us at support@orfeldtech.com

7. Technical Specification:

Charging Period
Battery Charger Output
Usage time
Possible cause
1. Dustbin is full
2. Filters clogged or dirty
3. Filters are out of service
Brush roller clogged by hair,
1. Dustbin not seated
completely
2. Filters clogged or dirty
3. Dustbin not installed
correctly
4. Low battery
5. Nozzle or dirt passage
clogged
on 1. Dustbin is full
2. Filters clogged or dirty
3. Vacuum overheat
1. Low battery
2. Vacuum overheat
1. Low power
2. Filters clogged or dirty
Battery
Net Weight
Power
Airflow
etc.
.
25.9V/2200mAh
4.5 hours
31V/500mA
2.3 kg
15min(Max-cleaning mode)
30min(Daily-cleaning mode)
250W
3
1.2 m /min
10
power and remove
Possible solution
1. Empty the dustbin
2. Clean the
3. Change the worn
Clean the brush roller
1. Reinstall the dustbin.
Make sure lid is closed
completely
2. Clean the
3. Reinstall the dustbin
4. Fully charge the battery
5. Disconnect nozzle to
remove debris
1. Empty the dustbin
2. Clean the
3. Let vacuum cool down and
retry
1. Fully charge the battery
2. Let vacuum cool down and
retry
1. Fully charge the battery
2. Clean the