About This Guide - Kathrein EXD 1524 Anleitung

EXD 1524 20510137
EXD 2524 20510138
Sat IF Distribution System (4 x Sat IF)
Digital Single-Cable Multi-Switch

About This Guide

This document is part of the product.
► Do not install or use the device until
you have read and understood this
document.
► Keep this document for reference
throughout the service life of the
device. Pass this document on to any
new owner or user.
For the most up-to-date version of this
document, go to www.kathrein-ds.com.
Features
Third-generation single-cable multi-

switches – Digital Channel Stacking
Switch (dCSS) with the newest Full-
Band Capture Technology
Cascadable twin multi-switch. For

both outputs, various confi gura-
tions/ numbers of user bands can be
selected using the rotary switch
User-band frequencies compatible

with the previous Kathrein models
Multi-feed by means of an easy

connection of the outputs with the
splitter (EBC 110)
EN 50494 single-cable set of

commands and the new, extended EN
50607 (SCD 2) set of commands are
supported
Future-proof due to Wideband tech-

nology (broadband inputs); up to four
satellite positions possible due to
wideband LNBs
The integrated AGC (Automatic Gain

Control) ensures that the Sat IF signals
have a constant output voltage and
more reserve in the distribution
geeignet für DVB-T/T2
Multi-tuner devices, e.g. UFS 926, can be

supplied with a multitude of user bands
on one drop cable
PIN code: User frequency protection

from being accessed by another user.
This enables installation across more
than one residence
Up to eight multi-switches can be

cascaded
Due to the energy-saving concept, the

multi-switch consumes no energy from
the NCF 18 if all receivers are switched
o If Kathrein Power Saving is active,
the power supply for the LNBs is also
turned o .
LED as an installation aid and for trouble-

shooting
For indoor installation

1 / 12