Hilti HA EXO-O1 Original Bedienungsanleitung Seite 33

10. Center your upper arm in the arm support.
11. Use the pull loop to engage the magnetic catch in
the hook on the arm support.
▶ Make sure that the magnetic catch engages fully.
12. Use the burr fasteners to adjust the fit of the arm-
support strap round your upper arm. Center the burr
fasteners and close them completely.
▶ The arm-support strap is adjustable at both ends.
13. Secure the arm support on the other side of your body in the same way.
*2282599*
2282599 English 29