Primatek S Dial WORK CBG Bedienungsanleitung Seite 9

5. Inputting (or modifying) tolerance limits
The tolerance limits are defined by introducing lower and upper intervals, compared to the nominal rating.
Note 2 :
- Depending on the case, we can cross the indicators (red and yellow) by reversing the order of the tolerance limit input.
(lower limit > upper limit)
CLEAR
..................... Input the nominal value
(see chap. 6)
..................... Input the lower tolerance limit
(see chap. 6)
..................... Input the upper tolerance limit
(see chap. 6)
9
Note 1 :
- If no tolerance limits have been
defined by the user, the instrument
will only display the tolerance
limit indicators but will not turn on
the indicator lights (red - green -
yellow).
E