System - auna CDC-200 Discman Bedienungsanleitung

SYSTEM

Press the Menu button to view the main menu .Press the Next/ Previous
button to select 'System',Push the ENTER button to confirm.the menu
options are::Time,Language, Factory Reset, Software version.
1. Time
If there is any DAB+ radio signal, the unit will automatically update the time,
there is no signal, can also be set manually.
• Set Time/Date: set hour / set minute / set month / set date>set year >
saved
• Auto update options: update from Any / update from DAB / update
from FM / No update
• Set 12/24 hour: 12hour/24hour
• Set date format: DD-MM-YYYY/MM-DD-YYYY Cycle through Time menu
by Push the ENTER button, select a particular option, and Push the
ENTER button changes.
2. Language
– the language used for display messages can be selected from below
options: English, German. The system menu, press the Next/ Previous
button to select "Language" through the list of menu, Push the ENTER
button to confirm. Cycle through Language menu by press the Next/
Previous button, select and stop at a particular language, Push the
ENTER button to confirm.
3. Factory Reset
This function clears all user defined settings, replacing them with the
original default values, so time/date, preferences/settings, DAB station
list and preset stations are all lost. Under the system menu, press the
Next/ Previous button to select "Factory Reset" through the list of menu,
Push the ENTER button to confirm. Then, use the Next/ Previous button
to choose <Yes> and Push the ENTER button to start the factory reset.
4. Software version
This is used to display the current software version. Under the system
menu, press the Next/ Previous button to select "Software version"
through the list of menu fig.14, Push the ENTER button to confirm. Then,
the existing SW version will be showed.
EN
27