Use And Cleaning Information; Control Descriptions; Mixer Use - FIMAR MX25 Betriebs- Und Wartungsanleitung

3
USE AND CLEANING
INFORMATION

Control descriptions

1) On button MX40-
MX25 FX40-FX42S
Press the button to start the machine. Release to
MX42S-MX42
stop the machine.
2) Speed adjustment knob
(MX40-FX40 only)
The speed adjustment knob both adjusts utensil
speed and directly by-passes to maximum machine
speed. To switch from one condition to another,
rotate the knob one notch.
a) Adjustable speed (only use with the whip
utensil):
- on FX40, it is marked:
- on MX 40 it is numbered from 1 to 10
b) Maximum speed (only use with the mixer
utensil):
- on both MX40 – FX40 models, it is marked:

Mixer use

- Insert the mixer utensil in the motor unit and tighten the MX25-MX40-
FX40-FX42S
utensil lock nut.
MX42S-MX42
- Connect the motor unit to the power plug.
- For MX40 – FX40 models, turn the speed adjustment
knob to:
- Firmly hold the mixer lock nut with one hand and the
motor unit handle with the other.
- Insert the mixer in the container with the product to be
processed.
- Press the on button being careful not to near hands or
any other part of the body to the area where the mixer
blades are located.
- When finished, release the on button to stop the utensil
and remove the utensil from the container.
DANGER – WARNING: Never near upper limbs or other parts of the body to the
area where the mixer utensil blade is located when inserted in the motor unit. Only clean
utensils removed from the motor unit.
FIMAR-RUSSIA.RU +7 495 989 1055