Safety Devices; Safety Information - FIMAR MX25 Betriebs- Und Wartungsanleitung

Safety devices

Safety information

•
Careful consultation of this manual before installation and use is essential. Continual observance of the
indications found in the manual guarantee personal and machine safety.
•
Never tamper with safety devices for any reason.
•
Strict observance of the work safety regulations issued by the responsible organisations in each country
is strongly recommended.
•
The manufacturer is not liable for damages to persons or things due to the neglect of safety regulations.
•
Correct machine placement, illumination and cleanliness are important conditions for personal safety.
•
Do not expose the machine to the elements.
•
Machine connections and start-up must only be performed by specialised technicians.
•
Make sure that the system specifications of the room where the machine is installed correspond to the
information printed on the plate.
•
Make sure the machine is connected to a grounding system.
•
The work area around the machine must always be kept clean and dry.
•
Use the garments foreseen by work safety regulations.
FIMAR-RUSSIA.RU +7 495 989 1055
INFORMATION
Forced retension on button: Releasing the
button cuts off power to the utensil and turns it off,
stopping the utensil
Switch protection: The protection protects the
operator from accidentally starting the utensil in
normal work conditions.
1
GENERAL