Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
__________________________________________________________________________________
ENGLISH
__________________________________________________________________________________
General Safety Instructions
ATTENTION!
This information needs to be considered during handling and operation of products with the
following description:
Isopad Drum & Gas Bottle Heating System of Series
FIDR-SR, FIBDR-SR & FIGB-SR
These will be referred as "product" throughout this manual for ease of context.
Please read the manual carefully ahead of use of these products. Follow the declaration on the type plate
and the warning instructions at the product. Keep this manual for later appropriation! This manual needs
to be held in charge apparently. The products can be operated only according to occupational health and
safety law, regional safety regulations and instructions of the Accident Prevention & Insurance
Association. Please take these advices as part of the operating instructions of your QA-System Handbook.
Handle these advices also like a manual. Never remove warning labels on the product! The products have
been designed and manufactured according to European norms (EN) and comply with international
standards (IEC) as well as the latest European directives listed in the declaration of conformity.
Installation, initial operation and maintenance have to be executed according to the latest related
standards. The unit has to be operated in accordance with these norms, standards, directives, and
regulations! Other local requirements that may apply must be followed as well!
ELECTRICAL EQUIPMENT!
These products represent electrical equipment! To prevent from danger caused by electric energy,
an earth leakage current breaker (ELCB or RCD) has to be installed for protection purpose. This ELCB
should represent a tripping current of 30mA.
To guard against electric shock, the products have to be installed, maintained and serviced by
authorized and trained staff and users only, according to latest norms, standards and directives!
HAZARDOUS AREAS!
The products are developed for use in hazardous areas. Therefore please read the concerning chapters
very carefully! The products are comprising of certified components and are approved for hazardous
areas. All other components used along with these products must be suitable for the use in hazardous
areas or comply with the latest hazardous area safety standards. Hazardous areas are classified by an area
zone and a temperature class which indicates the highest admissible temperature, otherwise gases or
other potential explosive media can explode. In hazardous areas the temperature of the heating systems
implemented should never exceed the critical temperature class rating specified by the user and
incorporated into the design. The products are design limited for a certain area zone and temperature
class indicated in the product specification.
4 |
P a g e - S e i t e
1235-OMH FIDR-FIBDR-FIGB-SR R16-0
Werbung
Inhaltsverzeichnis
