Renkforce 1403558 Bedienungsanleitung Seite 2

Operating instructions
Mini-DP to HDMI + VGA adapter
Item no. 1403558
Intended use
The product is intended for connecting the Mini DisplayPort of a computer in order to
provide an HDMI port and VGA port.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this
product. If you use the product for purposes other than those described above, the
product may be damaged. In addition, improper use can cause hazards such as short
circuiting, fire, electric shock etc. Read the instructions carefully and keep them for
future reference. Make this product available to third parties only together with its
operating instructions.
The product corresponds to the legal, national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
HDMI® is a registered trademark of HDMI Licensing L.L.C.
Delivery content
• Mini-DP to HDMI + VGA adapter
• Operating instructions
Up-to-date Operating Instructions:
1. Open www.conrad.com/downloads in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item
number into the search field. After submitting the query you
can download displayed records.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in these operating instructions, we assume no liability
for any resulting personal injury or damage to property. Such cases will
invalidate the warranty/guarantee.
• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Also observe the safety and operating instructions of any other devices
which are connected to the product.
• Make sure the cable does not get bent or jammed.
• Do not install the product near strong magnetic fields, such as in the
proximity of machines or speakers.
• Never use the product immediately after it has been brought from a cold
room into a warm one. The condensation generated could destroy the
product. Allow the product to reach room temperature before connecting
and using it. This may take several hours.
• Consult a professional if you require assistance with product operation,
safety or connection.
• Maintenance work, adjustments and repairs may be carried out only by a
professional or at a specialist workshop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Operation
• Connect the plug of the product to the Mini DisplayPort of your computer.
• Connect an HDMI or VGA monitor to the corresponding port of the product using a
suitable cable.
Simultaneous video output via both ports is not supported.
Any existing audio signal will be rendered via the HDMI port only.
Installation of a driver is not required.
The product works independently from the operating system of the
computer.
Maintenance and cleaning
• Under no circumstances use aggressive cleanings agents, cleaning alcohol or other
chemical solutions since these can penetrate the housing or impair functionality.
• Disconnect the product from all connected devices before cleaning.
• Never submerge the product in water.
• Have maintenance and repairs done by qualified experts or repair shops only. There
are no components located inside the product you need to maintain.
• To clean the product, a dry, soft and clean cloth is sufficient. Do not apply too much
pressure to the housing as this may cause scratch marks.
• You can easily remove dust using a long-haired, soft and clean brush.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfil your statutory obligations and contribute to the protection of
the environment.
Technical data
Resolution............................................. HDMI: max. 3840 x 2160, 30 Hz
DisplayPort Standard .........................1.2
Cable length .........................................15 cm
Operating conditions ..........................-10 to +60 ºC, 20 – 80 % RH
Storage conditions..............................-20 to +80 ºC, 10 – 90 % RH
Dimensions (W x H x D)......................64 x 21 x 51 mm
Weight ...................................................40 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the
technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.
VGA: max. 1920 x 1200, 60 Hz
V1_0116_02-ETS-Mkd