Go/on YL-B27-9 Gebrauchsanleitung Seite 44

Original instruction manual
incline or decline.
2. Set all the controls to OFF position and insert the plug into
a socket-outlet with well grounded. Be sure that plug fits
firmly.
3. Rotate the thermostat knob clockwise to MAX position and
switch the heater on as follow: the switch I for low heat, the
switch II for medium heat and the switch III for high heat.
4. When your room reaches the desired temperature, now
slowly rotate the thermostat knob counter clockwise until
the pilot light goes out. The thermostat can now be left at
this setting. As soon as the room temperature has dropped
below the set temperature, the unit will switch it self on
automatically until the set temperature has been reached
again. In this way the room temperature remains constant
with the most economical use of electricity.
5. If you want to change the room temperature setting, rotate
the thermostat knob clockwise to raise the temperature, or
counter clockwise to lower it.
6. This heater includes an overheat protection system that
shuts off the heater when parts of the heater are getting
excessively hot.
7. To completely shut the heater off, turn all the controls to
OFF, and remove plug from the socket-outlet.
MAINTENANCE
1. Always disconnect the appliance and let it completely cool
before any maintenance.
2. Use a vacuum cleaner to remove dust on grilles.
3. Clean the outside of the unit with a damp cloth and then dry
it with a dry cloth. Never immerse the unit in water, nor let
water drip into the unit.
STORING
1. Always disconnect the appliance, let it completely cool and
clean it before storing.
44
En
04/2019