Philips FC9319 Bedienungsanleitung Seite 12

English
12
5 First insert the front of the dustbag holder into the vacuum cleaner
(1) and then press the back into the vacuum cleaner (2).
Note: If no dustbag has been inserted, you cannot close the cover.
6 Push the cover downwards to close it.
Motor protection ilter
To guarantee optimal performance, replace the motor protection ilter
once a year. You can dispose of the old ilter with the normal household
waste.
1 Remove the dustbag holder with the dustbag.
Press down the tab at the top of the motor protection ilter holder
2
to release it (1). Lift the ilter holder out of the dustbag
compartment (2).
Put the new ilter in the ilter holder.
3
Fit the two lugs of the ilter holder behind the ridge at the bottom
4
to ensure that it its properly at the top (1). Then press the ilter
holder home ('click') (2).
5 Place the dustbag holder with the dustbag back into the appliance
and close the cover.
HEPA 13 ilter
The HEPA 13 ilter is able to remove 99.95% of all particles down to
0.0003mm in size from the outlet air. This not only includes normal house
dust, but also harmful microscopic vermin such as dust mites and their
excrements, which are well-known causes of respiratory allergies.
Note: To guarantee optimal dust retention and performance of the vacuum
cleaner, always replace the HEPA ilter every 2 years with an original Philips
ilter of the correct type (see chapter 'Ordering accessories'). You can dispose of
the old ilter with the normal household waste.