Explanation Of Symbols; Operation - Sygonix 1406856 Bedienungsanleitung

Operating instructions
USB charging adapter 5 V / 3.4 A
Item no. 1406856
Intended use
The product is suitable for power supply or charging up to two compatible USB devices.
Power supply of the USB charging adapter is provided by a regular home mains socket with a
protective earth contact.
The mains line is looped through to a socket with a protective earth contact on the front side of
the USB charging adapter, to which any load can be connected (max. 3680 W, 16 A).
Please read the operating instructions carefully and do not discard them. If you pass the prod-
uct on to a third party, please hand over these operating instructions as well. Observe all safety
information and other information in these operating instructions.
Any use other than that described above could lead to damage to the product and involves a
risk of short circuits, fire, electric shock, etc.
This product complies with the applicable National and European requirements. All names
of companies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• USB charging adapter
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.

Explanation of symbols

The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
The product is only intended to be placed and used in dry, enclosed indoor areas; it
must not get damp or wet.
Observe the operating instructions!
Safety instructions
The warranty will be void in the event of damage caused by failure to observe
these safety instructions! We do not assume any liability for any resulting
damage!
We do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions! In such cases,
the warranty will be null and void!
a) General
• The unauthorised conversion and/or modification of the product is not permitted
for safety and approval reasons. Do not open/disassemble! Contains no custom-
er-serviceable parts.
Maintenance, adjustment or repair work may only be carried out by an expert/
authorised service centre, which is familiar with the hazards involved and the
relevant regulations.
• The product is designed according to protection class I. It may only be used when
connected to an earthed mains socket.
• The product is equipped with a protection against accidental contact. An integrat-
ed mechanism will release the holes of the receptacle only, if the two prongs of a
power plug are inserted into the two holes at once.
• Take special caution when children are around. Children cannot recognize the
danger arising from the incorrect use of electrical devices. There is a risk of a
life-threatening electric shock!
• The product is not a toy and must be kept out of the reach of children. Position
the product so it is out of the reach of children.
• Do not leave the packaging material unattended since this may become a dan-
gerous plaything for children.
• Handle the product with care; it can be damaged by impacts, blows, or accidental
falls, even from a low height.
b) Operating location
• The product may be used in dry, enclosed indoor areas only; it must not get damp
or wet! Never use the product in the direct vicinity of a bathroom, shower, bathtub
or similar. There is a risk of a life-threatening electric shock!
• The product must not be exposed to extreme temperatures, direct sunlight or
strong vibrations.
• Do not operate the device in environments where there are high levels of dust,
flammable gases, vapours or solvents. There is a danger of fire and explosion!
c) Operation
• Never touch, operate, plug in or unplug the product with damp or wet hands.
There is a risk of a life-threatening electric shock!
• Never connect the product to the power supply immediately after it has been
transferred from a cold room into a warm one (e.g., during transport). The con-
densation that forms might destroy the device. Moreover, there is danger of elec-
tric shock!
Allow the device to reach room temperature before switching it on. Wait until
the condensation has evaporated. This might take several hours. Only after this
should the product be plugged into the power supply and put into use.
• Do not pull the power plug from the mains socket by pulling on the cable! Always
pull the power plug from the mains socket by gripping the area provided for this
purpose on its sides.
• Never overload the product. Observe the maximum connected load in the chap-
ter "Technical data".
• Do not connect in series! This can lead to overloading of the product! There is
a risk of fire!
Plug the earthed mains plug on the back of the USB charging adapter directly
e.g., into a wall socket.
• Do not operate while it is covered! At higher connected loads, the USB charging
adapter will get hot, which may lead to overheating posing a risk of fire, if it is
covered!
• Only voltage-free, when the plug is removed!