Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• The mains socket into which the USB charging adapter is plugged must be easily
accessible.
• Do not use the product if it is damaged. There is a risk of a life-threatening electric
shock!
• In this case, dispose of the product in an environmentally correct manner.
Safe operation can no longer be assumed if:
- the product shows visible signs of damage
- the product does not work at all or works poorly (leaking smoke or a smell of
burning, audible cracking noises, discolouration to the product or the adjacent
surfaces)
- the product was stored under unfavourable conditions
- it was exposed to heavy loads during transport
• Only use the device in a temperate climate, never in a tropical climate.
• Always unplug the USB charging adapter from the mains socket before cleaning
it or when the device is not be used for a long time. Unplug also the USB devices
connected to the USB charging adapter.
• Never pour any liquids above or next to the product. You run the risk of causing
a fire or a fatal electric shock.
If any liquid has still happened to enter the device, immediate-
ly turn off the power supply to the mains socket to which the USB
charging adapter is connected (turn off the fuse / circuit breaker /
residual current operated circuit breaker of the associated circuits).
Only then can you unplug the USB charging adapter from the mains socket and
contact a specialist. Do not use the product any longer.
• In commercial institutions, the accident prevention regulations of the Employer's
Liability Insurance Association for Electrical Systems and Operating Facilities are
to be observed!
• If you have any questions that are not answered in these operating instructions,
please contact our technical department or another specialist.
Start-up
• Plug the USB charging adapter into a regular grounded mains socket (e.g. wall socket) of the
public supply grid. The blue LED between the both USB sockets will light up (power LED).
• Switch off the USB device if it has an on/off switch.
• Connect the USB device with one of the USB sockets on the front side of the USB charging
adapter.
• Now switch on the USB device if it has an on/off switch.
Total current provided to both USB sockets on the front side of the USB charging
adapter is 3.4 A.
If two USB devices are connected, this current is automatically distributed (e.g. 1 A
and 2.4 A).
Do not overload the USB charging adapter, as it can damage the device.
Due to integrated electronics, the USB charging adapter detects the charging cur-
rent required by a mobile phone, smartphone or tablet.
However, due to great variety of devices it cannot be guaranteed that all devices
can be charged with maximum possible charging current (as in case of an original
charger matching the device).
• If a USB device does not operate correctly, disconnect it from the USB charging adapter.
• If there are no USB devices connected to the USB charging adapter, unplug it from the mains
socket to save energy.
Maintenance and cleaning
The product does not require any maintenance and should never be disassembled for any
reason.
Before cleaning, disconnect the product from the mains voltage and unplug the mains plug
from the mains socket. If a USB device is connected, disconnect it from the USB charging
adapter as well.
Use a dry, clean, soft cloth for cleaning. Dust can be easily removed with a dry, soft, clean brush
and a vacuum cleaner.
Do not use abrasive cleaning agents, rubbing alcohol or other chemical solutions,
which may damage the casing or even impair operation.
Disposal
The product must not be disposed of in the household waste!
Please dispose of the product, when it is no longer of use, according to the current
statutory requirements.
Technical data
Operating voltage ............................................ 230 V/AC, 50 Hz
USB output voltage .......................................... 5 V/ DC
USB output current .......................................... 3.4 A (total; distributed automatically between
Protection class ............................................... I
Mains connection for the load .......................... grounded mains socket on the front side of the
Enhanced protection
against accidental contact ............................... yes
Overload protection ......................................... yes
Short-circuit protection ..................................... yes
Excess temperature protection ........................ yes
Voltage surge protection .................................. yes (75 J)
Environmental conditions ................................ Temperature 0 °C to +40 °C, air humidity max.
Dimensions (H x W x D) .................................. 110 x 56 x 32.5 mm (without plug)
Weight ............................................................. 128 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
two USB ports)
USB charging adapters, 230 V/AC, 50 Hz, max.
3680 W, 16 A
85%, not condensing
10 x 56 x 71 mm (with plug)
*1406856_v2_0620_02_dh_m_3L
Werbung
