Component List - Kress KUE12 Originalbetriebsanleitung

by Kress. Do not use any charger other
than that specifically provided for use
with the equipment. A charger that is suitable
for one type of battery pack may create a risk of
fire when used with another battery pack.
o) Do not use any battery pack which is not
designed for use with the equipment.
p) Keep battery pack out of the reach of
children.
q) Retain the original product literature for
future reference.
r) Remove the battery from the equipment
when not in use.
s) Dispose of properly.
t) Do not mix cells of different manufacture,
capacity, size or type within a device.
u) Do not remove battery pack from its
original packaging until required for use.
v) Observe the plus (+) and minus (–) marks
on the battery and ensure correct use.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Warning
8
EN
Wear eye protection
Wear ear protection
Wear dust mask
Li-Ion battery. This product has been
marked with a symbol relating to
'separate collection' for all battery
packs and battery pack. It will then
be recycled or dismantled in order to
reduce the impact on the environment.
Battery packs can be hazardous for the
environment and for human health since
they contain hazardous substances.
Do not burn
Batteries may enter water cycle if
disposed improperly, which can be
hazardous for ecosystem. Do not
dispose of waste batteries as unsorted
municipal waste.
Waste electrical products must not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice

COMPONENT LIST

1. SAFETY SWITCH
2. ON/OFF TRIGGER
3. FRONT HAND GRIP
4. SPINDLE LOCK BUTTON
5. BASE PLATE ANGLE SCALE
6. PARALLEL GUIDE
7. PARALLEL GUIDE CLAMPING FIXTURE
8. CUTTING MARK, 0°
9. CUTTING MARK, 45°
10. BASE PLATE BEVEL LOCK KNOB
11. BASE PLATE
12. BATTERY PACK *
13. BATTERY PACK RELEASE BUTTON*
14. LOWER GUARD LEVER
15. INNER FLANGE (SEE FIG. A)
16. SAW BLADE (SEE FIG. A)
17. OUTER FLANGE (SEE FIG. A)
18. BLADE BOLT (SEE FIG. A)
19. SPINDLE (SEE FIG. A)
20. LOWER BLADE GUARD
21. FIXED UPPER BLADE GUARD
22. DEPTH ADJUSTMENT LEVER (SEE FIG. B)
23. HEX KEY(SEE FIG. B)
24. HEX KEY STORAGE AREA (SEE FIG. B)
25. CUTTING DEPTH SCALE
26. DUST EXTRACTION OUTLET
*Not all the accessories illustrated or
described are included in standard delivery.