Schartec R5203 Anleitung Seite 4

Connection 230 V lamp:
Remote Programming
1. Coding in the remote: Press the "Learn button", the "LED 1" lights up red. Press button "1" twice in succession, the
"LED 1" flickers for a few seconds, then goes out again. This means that the remote has been taught in and works as
follows: Button 1 = controls channel 1, Button 2 = controls channel 2
2. Deleting stored remotes: Press and hold the "Learn button", the "LED 1" lights up red. While keeping the button
held, after approx. 8 seconds the "LED 1" goes out again, now release the "Learn button". The LED now lights up red
again briefly and then goes out again. The deletion process is now finished.
3. Code in a remote using a remote that has already been coded in: Press "Button 1" and "Button 2"
simultaneously on the remote that has already been coded in. Then briefly press "Button 2" of the coded in remote
once. Now press "Button 1" twice in succession on the new remote. The new remote has now been coded in.
Simplified EU Declaration of Conformity (CE)
Schartec hereby declares that the radio equipment type Schartec R5203 complies with Directive 2014/53/EU. The full text of the EU Declaration of
Conformity can be requested at the following Internet address: www.schartec.de
As a dealer for the distribution of electronic, battery-operated devices, we are obliged by law to inform our customers about the following:
Electrical and electronic devices, as well as batteries, must not be disposed of as household or residual waste, but must be delivered in the appropriate
acceptance and collection points. The complete version of the battery law can be found here: http://www.gesetze-im-internet.de/battg/index.html