Herunterladen Diese Seite drucken

Schartec R5203 Anleitung Seite 3

Externer funkempfänger

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

SCHARTEC
a trademark of bau-shop-24 GmbH
Fritz-Müller-Strasse 119
73730 Esslingen
Germany
WEEE Reg. Nr.: DE90317979
BattG Reg. Nr.: 21008776
Safety Instructions
• Please read this manual before installation and use.
• To prevent accidental operation of door drive, not attempt to code in the remote control while the door drive is moving / in use.
• The signal may be interfered with by other radio devices in the environment (e.g. babyphones or the like that have the same
frequency). Therefore, this product must not be used with high-risk devices (e.g. cranes or the like).
• Keep remote controls out of reach of children.
• The remote control should only be used when in visual sight of the door / gate.
• Remote controls should only be used by persons who have been properly instructed in it's use.
• Protect the remote and receiver from rain, snow, direct sunlight, as well as dust.
• The receiver is intended for dry rooms only.
• Interferences may occur if the receiver is placed too close to the door operator control board.
• Function of the radio receiver may be impaired if the connection cables are too long.
Technical Data
• Power Supply: 85-265V AC
• Power consumption: <0.5 W
• Frequency: 433.92 MHz Rolling-Code
• Operating Temperature: -20°C - +60°C
• Max Memory: 300 Codes
• Channels: 2
• Article number: ST201009
• Model number: Schartec R5203
DIP-Switches
DIP1
ON
Channel 1 = Switch (Deadman) Channel 2 = Switch (Deadman)
OFF
Channel 1 = Impulse
Door operator connection
Schartec External
Wireless Receiver R5203
Channel 1 button
DIP2
Channel 2 = Impulse
Channel 2 button
ATTENTION! Do not use a connection cable that is
too long, as this can lead to malfunctions or
problems!
WARNING! Risk of Death!! Switch off the voltage
and check that there is no voltage before
connecting!

Werbung

loading