AFRISO DIM 20 Betriebsanleitung Seite 45

6.5.5 Menu 4: UNIT (pressure unit)
Note that you may have to modify the position of the decimal point if you
change the unit.
1. Open the menu item UNIT.
2. Press the OK key.
- The currently selected unit flashes.
3. Select the required unit using the arrow keys. Depending on the pres-
sure range, some pressure units may not be available.
- bar
- mbar
- PSI
- InHg
- cmHg
- mmHg
- hPa
- kPa
- MPa
- mH
4. Press the OK key to confirm the setting.
6.5.6 Menu 5: SW OFF (automatic switch-off)
1. Open the menu item SW OFF.
2. Press the OK key.
- SW OFF flashes.
3. Select the required number using the arrow keys:
- The numbers 0 to 5 can be selected.
- If you select 0, automatic switch-off is deactivated.
- The numbers 1 to 5 let you specify the automatic switch-off time in min-
utes.
4. Press the OK key to confirm the setting.
Commissioning
O
2
EN
DIM 20
19