Zooper ORION Bedienungsanleitung Seite 46

USING THE ORION
Installed in car
2. Installed in the forward facing position with ISOFIX and
vehicle seatbelt
NOTE:
Press the ISOFIX adjuster to pull out both locking arms, from the under of base
pull the locking arm to and for until you hear an audible CLICK which indicates
they are fully engaged. And on both sides of the locking arms, the button turn
into green safety color.
First pull out the belt from the belt ALR. Diagonal belt through the same side
of Guidance , lap belt through the same side of Guidance

diagonal belt and lap belt together through another side of Guidance
the tip of the buckle into the vehicle seat buckle with an audible CLICK.
Keep the diagonal belt at the position of shoulder between the outside of the
neck and shoulder( Middle of point A and B).
(see picture a)
www.zooper.de
46
Ensure the lap belt is as close
as possible to lower.
Ensure the lap belt on the
pelvis,not on the abdomen.
, then pull the

. Lock
