Zooper ORION Bedienungsanleitung Seite 42

USING THE ORION
Installed in car
NOTE:
The ISOFIX attachment points are located between the surface and the
backrest of the vehicleseat..
Press the ISOFIX adjuster to pull out both locking arms, from the under of
base pull the locking arm to and for until you hear an audible CLICK which
indicates they are fully engaged. And on both sides of the locking arms, the
button turn into green safetycolor.
Pull out the top tether, and press the release button, pull the top tether long
enough to hang the LATCH on the back of the car seat.
Fixed the LATCH on the fixed point, and the position of the fixed point are
shown in the picture. (one of the three position). Make sure the hook is tighte-
ned up.
42
www.zooper.de