Using The Height Of The Harness - Zooper ORION Bedienungsanleitung

USING THE ORION

Using the height of the harness

1. Loosen the shoulder straps in order to access the metal link and
connector at the back of the child seat..
2. Remove the straps from connector, then remove the shoulder
straps from the metal link, follow step
3. From the front of the child seat, again thread theshoulder straps through the
desired slots. Make sureboth of the straps go through the slots at the same
height.
4.
Connect both shoulder straps to the connector and metal link again.

www.zooper.de

36


.
 