Maintenance Lubrication - PIKO BR 218 Bedienungsanleitung

- Removeable roof with detailed grilles,
vents and exhaust stacks.
- Authentic reproduction of truck details,
such as journals, springs and suspension.
- Prototypical color scheme.
- Authentic and detailed markings.
Getting Started: Initial Operation
Unpacking the Model
Remove the styrofoam packaging
extremely carefully to prevent damaging
accessories and attached parts such as
handrails etc.
Initial Operation
We recommend letting the locomotive run
without a train for 30 minutes in both
directions, to properly break it in. This will
help achieve optimal performance and
longevity for the locomotive. Of course,
your model should only be run on smooth
and perfectly clean tracks with reliable
electrical contact to all track sections.
Technical Data
Buffers
Just like the original, the model locomotive
comes equipped with double-buffer end
beams. If single center-mounted buffers
are desired, the end beams can be easily
replaced. On the underside of the loco,
remove the two screws which secure each
end beam. Center-buffer end beams are
packed inside the locomotive's styrofoam
package.
Power Supply
The model should only be operated on a
pure, filtered DC power supply of 0 to 24
volts, with a capacity of at least 2 Amps
and a fast-acting fuse or circuit breaker to
protect against short circuits. Do not use a
power supply which is not in safe and
perfect working condition. (See "Digital
Decoder" section for operation on digital
power.)
Drive System
The locomotive's two trucks each contain a
robust gearbox with a powerful high-
precision can-type motor driving all axles
through a smooth gear drive
Lighting
The model is equipped with automatic
directional headlights, using white LEDs for
a realistic appearance. The "front" lights
are illuminated according to the travel
direction.
Radius
The locomotive can run on a track with a
minimum recommended radius of 600 mm
(23.62'').
Accessories
Digital Decoder
The model locomotive is prepared for
"plug and play" installation of a PIKO
# 36120 Multi-Protocol Decoder (available
separately). As soon as the decoder is
properly installed, the locomotive can be
operated on digital as well as Analog DC-
powered layouts.
Sound Module
The model locomotive is prepared for
"plug and play" installation of a PIKO
# 36191 Sound Unit (available separately).
This sound unit reproduces authentic
sounds of the real BR 218 Diesel. The
sound unit requires that the locomotive be
equipped with a PIKO # 36120 multi-
protocol decoder. The sound unit must be
connected to the multi-protocol decoder
via the included interface cable. The sound
unit includes a high-quality extended
frequency range speaker with a waterproof
diaphragm for outdoor operation. Note:
The sound unit is operable only on digital
layouts, not on Analog DC-powered
layouts.
Maintenance
Lubrication
After each 25 hours of operation, and after
any long periods of storage, please
lubricate the gears through the access
holes on the gearboxes with a sparing
amount of plastic-compatible, non-
hardening grease.
Cleaning
If cleaning is necessary, use only a mild
cleaning agent (such as soap and water)
and gentle action with a soft non-abrasive
cloth or brush.
Never immerse the locomotive in liquid or
"flood" any internal parts!
Please Note!
Damage to Carpets and Other Surfaces:
Normal operation of the locomotive causes
wear of mechanical parts (wheels,
electrical pickups etc.).
This produces carbonized dust, grease and
oil, which can permanently stain carpets,
wood floors and other materials. It is the
user's responsibility to take proper
precautions against this damage. PIKO
Spielwaren GmbH, as well as its
representatives, distributors and retailers,
assume no liability for any such damage.
Please Note!
Important Safety Precautions
• Check the power supply regularly for any
damage or problems.
• Do not use a malfunctioning or damaged
power supply!
• This model must only be operated with
one power source per circuit!
• This product is not suitable for children
under 8 years of age. This product has
small parts, sharp parts, and moving parts.
• This model must only be operated with a
safety-assured power supply!
• The power supply is not a toy!
• Disconnect the model from the power
supply before cleaning or servicing!
• Do not insert the track power connecting
wires into household "mains" voltage
outlets.
5