Installation; Technical Specifications - urmet 1060/37 Handbuch

REBOOT AND RESET BUTTON
Number of touches Description
1 (short) The system will be rebooted. The status LED will fl ash 1 time.
5 consecutive times (separated The device will be reset to default parameters; all confi gurations will
by less than 1 s) be lost. The status LED will fl ash 5 times fast.

INSTALLATION

Refer to the instructions contained in the system manual for wiring, maximum distances and confi guration
operations. The casing is suitable for fi tting on DIN bar and wall by means of screws and bolts; in all cases,
it must be installed in a dry place where it is sheltered from the elements. Use Urmet RJ45 connectors for
connections.
Insert the wires in the guide respecting the colour coding shown (Standard T568B).

TECHNICAL SPECIFICATIONS

Nominal power voltage:.................................................................................................................. 37 – 57 V
Stand-by intake (RS 485 active): ................................................................................................... max 25 mA
Max. consumption: ...............................................................................................................................150 mA
Max relay commutable charge: ................................................................................................... 1 A @ 30 V
Working temperature range:................................................................................................... -10 °C ÷ +50 °C
Dimensions: ...........................................................................................216 x 90 x 64 mm (12 modules DIN)
5
DS1060-146