Component List; Vibration Information; Technical Data - Kress KUY02P Originalbetriebsanleitung

COMPONENT LIST

1. KEYLESS CHUCK
2. AUXILIARY HANDLE
3. HAMMER DRILL /DRILL SELECTOR DIAL
4. LOCK-ON BUTTON
5. ON/OFF SWITCH
FORWARD AND REVERSE ROTATION
6.
CONTROL
Not all the accessories illustrated or described
are included in standard delivery.

TECHNICAL DATA

Type designation KUY02P (Y02P-designation of
machinery, representative of Impact Drill)
Voltage
Rated input power
Rated no load speed
6
Impact rate
EN Chuck capacity
Steel
Max drilling
Concrete
capacity
Wood
Machine weight
Protection class
ACCESSORIES
Auxiliary Handle
Depth Gauge
We recommend that you purchase your accessories
listed in the above list from the same store that sold
you the tool. Refer to the accessory packaging for
further details. Store personnel can assist you and offer
advice.
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
VIBRATION
INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Drilling into
metal
Impact drilling
into concrete
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
230-240V~50Hz
assessment of exposure.
650W
0~3000/min
0-45000bpm
from the declared value depending on the ways in
which the tool is used especially what kind of
13mm
workpiece is processed dependant on the following
examples and other variations on how the tool is used:
13mm
How the tool is used and the materials being cut or
drilled.
13mm
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
25mm
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
1.69kg
vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
/ll
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
1
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
1
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration and noise exposure
risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high vibration
L =90dB(A) tool use across a number of days.
pA
L =101dB(A)
wA
K & K
PA WA
Wear ear protection.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
5dB(A)
Vibration emission value
a 2.87 m/s²
h,D=
Vibration emission value
a = 5.98m/s²
h,ID
Uncertainty K = 1.5m/s²