Adjustments; Adjusting The Picture Brightness - Sony Trinitron CPD-200ES Bedienungsanleitung

Adjustments

When one of the preset-type signals is input, no picture
adjustment is necessary.
You can, however, adjust the picture to your preferences by
following the procedure described below.
You can adjust all items on the OSD (On Screen Display).
Control Panel
RESET COLOR
Adjusting the Picture Contrast
The adjustment data becomes the common setting for all input
signals.
1
>
Press the ?// button.
The "BRIGHTNESS/CONTRAST" OSD appears.
2
>
Press the ?// buttons to adjust picture contrast.
/ . . . for more contrast
? . . . for less contrast
The "BRIGHTNESS/CONTRAST" OSD disappears approxi-
mately 3 seconds after you release the buttons.
To reset, press the RESET button while the OSD is on.

Adjusting the Picture Brightness

The adjustment data becomes the common setting for all input
signals.
1
Press the ¨ >/. button.
The "BRIGHTNESS/CONTRAST" OSD appears.
2
Press the buttons to adjust picture brightness.
¨ >/.
. . . . for less brightness
> . . . for more brightness
The "BRIGHTNESS/CONTRAST" OSD disappears approxi-
mately 3 seconds after you release the buttons.
To reset, press the RESET button while the OSD is on.
GEOM SIZE CENTER
BRIGHTNESS/CONTRAST
1 0 0 50
3 1 . 5 kHz/70Hz
Horizontal Vertical
frequency∗ frequency∗
BRIGHTNESS/CONTRAST
1 0 0 50
3 1 . 5 kHz/70Hz
Horizontal Vertical
frequency∗ frequency∗
p Before adjusting the items, turn on the unit and feed the
video signal from the connected computer/work station.
Adjustments will be stored automatically.
p
Adjusting the Picture Centering
The adjustment data becomes the individual setting for each
input signal received.
1
Press the CENTER button.
The "CENTER" OSD appears.
CENTER
2
For vertical adjustment
Press the ¨ >/. buttons.
> . . . to move up
. . . . to move down
For horizontal adjustment
Press the > ?// buttons.
? . . . to move left
/ . . . to move right
To erase the "CENTER" OSD, press the CENTER button
again.
The "CENTER" OSD automatically disappears 10 seconds after
you release the buttons.
To reset, press the RESET button while the OSD is on.
∗ The horizontal and vertical frequencies for each input signal
received appear on the "BRIGHTNESS/CONTRAST" OSD.
CENTER
3 2 68
5
EN