Power On/Off; Multifunction Button (Mfb); Sos Button (Optional) - Ecom RSM-Ex 01 BT Z0 Bedienungsanleitung

7. Power On/Off

Switching On
Press and hold the power button for 3 seconds to turn on the product.
The „Power On" function is indicated via an audio prompt.
Please note that the product is always in a „switched on state" when charging.
Switching Off
Press and hold the power button for 3 seconds to turn off the product.
The „Power Off" function is indicated via an audio prompt.
Hardware Reset
Press and hold the power button for 12 seconds to reset the product. Once the button is
released, the product restarts.
8. Volume Control
The RSM-Ex 01 BT controls the volume of the connected device. If an HFP and A2DP
connection has been established, the RSM-Ex 01 BT will automatically control the
corresponding volume of the connected device.
To change the volume, press the volume up/down button briefly (long press not accepted).

9. Multifunction Button (MFB)

Incoming calls Press the MFB briefly (max. 1 second)
Active calls
Idle
10. Red Button (optional)*
An emergency call can be initiated via the SOS button.
The product will send „SOS=P" (SOS button pressed) and „SOS=R"
(SOS button released) when a SPP connection is established.
Note
The SOS function must be integrated in the respective application.
8
Press the MFB long (min. 2 seconds)
Press the MFB briefly (max. 1 second)
Press the MFB long (min. 2 seconds)
Accept a call
Reject a call
End a call
Redial a call