Accelerometer; Mute Function - Ecom RSM-Ex 01 BT Z0 Bedienungsanleitung

Connection Loss
If a Bluetooth connection loss appears (due to range), the RSM-Ex 01 BT automatically
tries to reconnect with the device. This happens until the devices have been reconnec-
ted or the RSM-Ex 01 BT has been turned off.
BT Name
The BT name of the device is „BT_RSM_PTT_XX:XX", where the „XX:XX" stands for
the last to words of the BT-Address.
For example „BT_RSM_PTT_44:55" (BT-Address: 00:11:22:33:44:55).
BT Details
Frequency & Output power
2402MHz ~ 2480MHz | 7.11dBm

14. Accelerometer

The RSM-Ex 01 BT has an accelerometer integrated. To read out the values, a SPP
connection must be established. Preamble, postamble and separator can be adjusted
via the xml-file. See software manual.
Read ACC data:
Command:
#ACC X \r\n
#ACC Y \r\n
#ACC Z \r\n
#ACC XYZ \r\n
#ACC T \r\n

15. Mute Function

Activating the mute function:
To activate the mute function, press and hold the volume down button for approx. 4
seconds. After successful activation, „Mute On" is indicated via an audio prompt and
flashing yellow and green LEDs.
Deactivating the mute function:
To deactivate the mute function, briefly press the volume up button.
After successful deactivation, „Mute Off" is indicated via an audio prompt and the yellow
and green LEDs turn off
10
Response:
X_value \n
Y_value \n
Z_value \n
X_value;Y_value;Zvalue \n
Temp_value \n