Multiplex Roxxy BL CA 88-19 Bedienungsanleitung Seite 2


Roxxy BL-Outrunner
®
The ROXXY® - BL-Outrunner-Motor-Range has been expanded
with the F3A competion motor CA 88-19 Dominator.
The outstanding features of this newly developed 22 pole outrunner
motor is its compact and open design, allowing extremely efficient
cooling. A further advantage of the design is the ultra short magnet
bell which will not distort even under extreme load. This helps to
minimise imbalance and frictional losses.
The motor design allows the ballraces to be widely spaced apart,
which leads to a an ideal bearing layout to minimise premature bear-
ing wear due to radial forces. No gearbox is required. It is a highly
efficiency, high torque motor with a broad power spectrum and ca-
pable of driving large propellers.
The motor is designed for direct mounting on the firewall of the
model.
The performance is comparable with a 26 cc internal combus-
tion motor.
Typical application
For electric gliders around 18 - 20 kg
Scale - and sport models around 8 - 10 kg
Aerobatic and 3-D models up to 7 kg
Installation advice
- Select the fixing screws length so that no damage to the motor
occurs. Use (Loctite 648) thread-lock fluid so that the screws do
not loosen in use. The thread-lock fluid must not get into the ball
bearings.
- Ensure the outrunner bell runs freely.
- Do not use damaged propellers.
- Ensure that neither dirt, water nor metal particles can enter the
inner workings of the motor.
- If the motor runs in the wrong direction, swap two the three power
cables over.
Recommended LiPo batteries
ROXXY ® Power LiPo-batteries
Specification
CA 88-19 Dominator No. 31 6969
Voltage
Rotational speed
Load current
Max. load current
Dimensions
Weight approx.
Shaft diameter
67 mm
30 mm
www.modellmarkt24.ch www.modellmarkt24.ch
Roxxy® BL-Outrunner – Bedienungsanleitung, Operating instructions,
Notice d'utilisation, Istruzioni per l'utilizzo –
20-50 Volt / 5-12 LiPo
220 rpm / V
80 A (5 min / 120°C)
95 A (60 secs.)
Ø 88 x 30/67 mm
630 g
8 mm
52 mm
40 mm
8 mm
C88-19
Dominator
Suitable Roxxy-BL-controllers
No. Type
31 8635 9100-6
31 8640 9100-12 Opto
Prop data table No. 31 6969
Voltage (V) LiPo-cells Propeller
30,5 8S-LiPo 20 x 13 APC
35,3 10S-LiPo 19 x 12 APC
!
Safety notes for operating the motor
- Whenever you are installing or otherwise handling the motor or speed control-
ler, be sure to observe the instructions supplied with those units.
- It is also important to study the instructions provided with the LiPo battery
before using them for the first time.
- Whenever you are working on the model - making adjustments, carrying out
maintenance etc. - keep well clear of the rotational plane of the propeller, as
it constitutes an injury hazard. Do not let anybody stand in front of the model
when the engine is running.
DISPOSAL
This symbol means that it is essential to dispose of electrical and elec-
tronic equipment separately from the domestic refuse when it reaches the
end of its useful life. Take your unwanted equipment to your local com-
munal collection point or recycling centre. This applies to all countries of
the European Union, and to other European countries with separate waste
collection systems.
CE CONFORMITY DECLARATION
This device has been assessed and approved in accordance with European harmonised
directives. This means that you possess a product whose design and construction fulfil
the protective aims of the European Community designed to ensure the safe operation
of equipment.
If required, you can request MULTIPLEX Modellsport GmbH & Co.KG to supply a copy
of the unit's Conformity Declaration. Please contact the company using the contact
details at the foot of the page.
Errors and omissions excepted.
Technical modifications reserved.
Copyright Multiplex Modellsport 2015
Duplication and copying of the text, in whole or in part, is only permitted with the prior written
approval of Multiplex Modellsport GmbH & Co.KG
Multiplex Modellsport GmbH & Co. KG
Westliche Gewerbestr. 1
75015 Bretten
Germany
Multiplex Service: +49 (0) 7252 - 5 80 93 33
www.multiplex-rc.de
No. 31 6969
LiPo cellcount / Load current (A)
2-6S / 100A
4-12S / 100A
Load current (A) Speed (rpm)
75 6.100
72 7.000