LEXIBOOK DJ090 Serie Handbuch Seite 29

You can play your files on TV by connecting the AV cable supplied.
1. Turn on the TV and set it to "AV" mode.
such as
2. Switch on the camera and connect it to TV using the supplied AV/USB cable.
value
Note: Take care to properly match the colour.
3. The camera LCD screen turns black and the TV screen now acts as the camera's LCD
0]/ [400].
4. Set the camera to Playback mode by pressing the Playback button (9).
5. Use the Left/Self-timer (16) or Right/Flash (11) button to scroll the files saved and press
6. Press the Shutter button (1) to play photo or video files. Press it again to pause. Press
n order to
7. Press and hold the Right/Flash button (11) to fast forward and the Left/Self-timer button
Notes:
ns to
• Use the supplied USB/AV cable to connect your camera to the TV.
y (10)
• For a better image quality, set the TV system to PAL or NTSC ("TV Output" in the
e" and
• If the image doesn't display in the center of the TV screen, adjust the TV settings (refer
None].
• The batteries are also used when the camera is connected to the TV.
your
"MAGIX Video easy SE": for editing video clips
1. Insert the CD Software (included) into your CD-ROM drive.
h, French,
2. In the main menu, click "Install MAGIX Video easy SE" and wait during the extraction.
3. The "Langue d'installation" window displays. Select the language of your choice and
uations
Note: The language by default is the French language.
4. "The MAGIX Video easy SE setup" window appears. Follow the onscreen instructions
e the
Note: QuickTime Player has to be installed on your computer. If it's not the case, do not
again
forget to install QuickTime Player during installing MAGIX Video easy SE. Follow the
on:
onscreen instructions.
our
5. Once the installation has completed successfully press "Finish". The "MAGIX Video
DJ090series1213_23May_V06.indb 29
Connecting the camera to a TV
screen.
the OK button (12) to display the file.
the Up/Display (10) button to stop playing.
(16) to fast rewind.
"Setup" menu).
to the TV instruction manual).
INSTALLING THE CAMERA SOFTWARE
press "OK" to confirm.
and press "Install" to begin the installation.
easy SE" shortcut will appear on the desk of your computer.
29
23/05/2013 1:23 PM