Loading A Cartridge - Seagate std224000n Installationsanleitung

Seagate DAT Drive Installation Manual
LED Code summary
The following table summarizes LED flash codes for
Seagate DAT drives.
LED color Action
Yellow ON (lit)
Yellow Flashing Rapidly
Green ON (lit)
Green Flashing Slowly
Green Flashing Slowly (with
yellow LED flashing)
Green Flashing Rapidly
Round,
ON (lit)
green LED
(external
drives only)

Loading a cartridge

Seagate DAT drives have a front-loading cartridge bay for
easy operation. The drive-bay door opens automatically
when a cartridge is inserted. Figure 11 on the following
page shows a cartridge being inserted into a 3.5-inch
internal drive. After you insert the cartridge, there will be
a brief delay while the drive identifies the cartridge type
and state and moves the tape to the data area.
Meaning
The drive is reading or writing the
tape.
A hardware fault occurred.
A cartridge is inserted and does not
generate excessive errors.
A cartridge is inserted but generates
excessive errors beyond a
predefined error threshold. (Warning
only) Use a DDS cleaning cartridge
to clean the heads.
A prerecorded audio cartridge is
inserted and is being played
automatically.
The drive could not write the tape
correctly. (Error) Use a DDS DAT
cleaning cartridge to clean the
heads.
The external drive is powered on.
17