Replacing The Filters - Gtech AirRAM AR29 Betriebsanleitung

Replacing the filters

Slide the filter onto the inner shroud.
Removing and cleaning the brush bar
If the brush bar jams during use, the
AirRam will stop and the LEDs will appear
red. Before checking for a blockage,
remove the battery.
Slide the filter and inner shroud into the
filter housing.
Rest the AirRam on its side and locate
the brush bar button on the right hand side.
Press the button inwards and then pull
the brush bar out from the bottom of
the AirRam.
ENGLISH
11