SSS Siedle AFS 870-0 Bedienungsanleitung Seite 5

Simultaneously incoming
calls
If the "call waiting" func-
tion is activated on the
system side, then when
there is an existing con-
nection, further calls are
signalled acoustically (call
waiting tone) on the device:
Call type
Door call
Story call,
Internal call,
External call
The pending calls in the
background are signalled as
a new incoming call once
the current call is ended
and can be processed in
order. Up to 10 calls can be
pending on the device. If
the "call waiting" function
is not activated, further
calls are rejected with the
engaged tone.
End call
Briefly press the speech
button once.
Muting
Pressing the 'muting'
button briefly will switch all
ringtones off/on again. If
muting is active, the button
is lit.
The speech button flashes if
there are incoming calls.
Call waiting
tone
2 x long
2 x short
Device configuration
The device is mainly config-
ured on the system side by
the relevant system admin-
istrator. The following set-
tings can be made directly
on the device:
Change ring tone volume
In idle status or if an
incoming call has not yet
been accepted, the ring
tone volume can be gradu-
ally adjusted by pressing
+ or – on the speech
button.
Changing the speech
volume
During a call, the speech
volume can be set by
pressing + or – at the
speech button.
Button assignment
This device features 3 func-
tion buttons. 2 buttons are
preset with functions on the
system side. All 3 buttons
can only be allocated freely
with other functions on the
system side. All function
buttons are LED-backlit for
visual acknowledgement
(yellow/red, door release
button single colour).
The following functions can
be configured on the system
side on function buttons:
• Initiate switching function
(e.g. door release, light,
garage door)
• Activate/deactivate door-
matic function
5